trmstd

MULTIFUNCTIONAL RTD

Resistance thermometer with 4-pin M12x1 connector

– Moulded IP67 connector
– foldable compact mineral insulation construction
(M.I.C.) Ø3 – 4,5 or 6 mm
– Suitable for temperatures up to 500°C

Google PlusLinkedinEmail

Technical data

Product type
probe
Type of sensor
thermoresistance
Sensor construction type
with mineral compact insulation (M.I.C.)
Sensor protection
metal sheath
Removable insert
no
Sensing element
Pt100 ? @ 0°C
Sensing Element configuration
single 4-wire
Output signal type
thermoresistance
Accuracy class in accordance to IEC751 (*)
(*) Pt 100 cl.A only available with 3 or 4 wires, cl.AA 4 wires only; Pt 1000 cl. A available with 2 wires only for cable lengths below 1 m, for longer cables only available with 3 or 4 wires, cl. AA 3 wires for cable lengths below 1 m, for longer cables only 4 wires.
cl. A
Operating range (in which the accuracy class is guaranteed) -30 ÷ 350°C
cl. B
Operating range (in which the accuracy class is guaranteed) -50 ÷ 500°C
cl. AA
Operating range (in which the accuracy class is guaranteed) 0 ÷ 250°C
Sheet diameter d=
(*) test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step
Ø 3 mm
Response time < 3,5 seconds(*)
Ø 4.5 mm
Response time < 7 seconds(*)
Ø 6 mm
Response time < 13 seconds(*)
M.I.C. min. bending radius
3 times the outer diameter (except the sensing tip which length is ~30 mm)
Sheet material
AISI 316L
Insulation resistance
100 M ?@ 100 Vdc.
Stem length L=
100 mm
150 mm
250 mm
350 mm
500 mm
750 mm
1000 mm
Dimensional notes
Lengths other than those listed can be produced for minimum quantities to be agreed (after our feasibility study)
Sensing part connection
connector
Type of connector
male 4-pin connector with M12x1 metal screw lock (in accordance with DIN-VDE0627 STANDARDS)
Connection body material
POLYAMYDE (MOULDED)
Maximum connector temperature
120°C
Fixing system
bare stem
Terminal electrical connection
4-pin male connector with M12x1 screw lock
Marking
marked with calibration value at 0 °C, production date and traceability code
Ambient tightness degree (*)
(*) in accordance with IEC 60529
IP67
FCM Features (Food Contact Materials) -40÷150°C
FCM Prescriptions
Before the use is required to wash the food contact areas
Contact food type
all the foods
Materials in contact with food
AISI 316L
Type of contact
continuous
Area suitable for contact
stem for a maximum length of 1 m (measured from the tip)
Contact food temperature range
-40 ÷150°C

Drawing

MULTIFUNCTIONAL RTD

Download

No download

Video

No video