Hot

evoxtp

EvominiX TP

Compact and programmable temperature transmitter with 4÷20 mA output

PC-configurable compact temperature transmitter with integrated probe and 1/8″ process connection. It comes in a robust IP67 casing with M12 output connection. It is particularly suited for measurements in fluids up to 110°C.

LinkedinEmail

Technical data

Electrical technical data
PCB operating temperature
-40 ÷85°C
Operating humidity
0 ÷100%
EMC
According to EN 61326-1 and EN 61326-2-3
Supply voltage
5.5 ÷32 Vdc (polarity protected)
Input/Output insulation
None
Electronic board input
4-wire RTD Pt100
PCB input range
From -50°C to +110°C
Signal
4÷20 mA
20÷4 mA
Permitted load
840O @ 24 Vdc [Rload= (Vsupply. - 5.5) / 0.022]
Sensor break or short-circuit monitoring
According to NAMUR NE43, selectable between:
Upper scale (> 21.0 mA)
Lower scale (< 3,6 mA)
Accuracy
Maximum value between ±0.1°C and ±0.1% of span
Effect of temperature (*)
(*) devation from 20°C
Maximum value between ±0,3°C/25°C and ±0,3% of span/25°C
Long-term stability
Maximum 0.1% of span per year
Linear error
Negligible
Range configurations
It is possible set the device by EVOMINI SET configuration kit (it is needed a PC with OS Windows).
Minimum span
20°C
Sensor error compensation
(±5°C) over two points
Sensor input signal filter (*)
(*) time to reach 90% of signal
Configurable from 0.4 to 9.4 seconds
Factory default
(4÷20)mA output
range (0÷100)°C
Sensor break >21mA
Sensor short-circuit <3.6mA
International protection marking (*)
(*) According to IEC 60529
IP65/67
Connection body material
THERMOPLASTIC
Sensor construction type
Stainless steel AISI 316L
Pt100 sensor accuracy
Class A up to 300°C according to IEC 751
Stem length L=
13 mm
24 mm
Thermowell rod
Ø3mm
Weight
20g (L=13mm)
21g (L=24mm)
Process connection (*)
(*) Thread STANDARDS (CYL. GAS in accordance with UNI-ISO 228) (CON. GAS in accordance with UNI-ISO 7-1) (NPT in accordance with ANSI B 1.20.1)
1/8" GAS CIL. sec. UNI-ISO 228
1/8" NPT
Terminal electrical connection
4-pin male connector with M12x1 screw lock
Response time
<3.5s (according to IEC 751)
Marking
Stating symbol "SEE MANUAL", marking symbol "CE", part number, Week / Year of production, power supply range, pinout and serial number
Option
On request adjustment on 1 or 2 points
Extension cable in TPE with overmolded M12 connector (IP67). Available cable lengths: (3, 8 or 12)m (others on request)

Drawing

EvominiX TP
Certification documents
dowloadCE declaration of conformity (391.11kB)
Catalogs
dowloadUser's manual R1 (1.54MB)
dowloadEvominiXTP ENG REV3 (1.71MB)
Miscellanea
dowloadEvominiX (Power Point) (27.62MB)
Drawings Documents
dowloadMechanical dimensions (76.58kB)
dowloadOutput connection (102.21kB)

Video

No video