Technical Specifications
Sensing element
Pt100 Ω @ 0°C
Sensing Element configuration
single 4-wire
Output signal type
thermoresistance
Accuracy class in accordance to IEC751 (*)
(*) The accuracy class is valid only in the temperature range indicated by the norm
cl. A
cl. B
Sensing element operating temperature range
-50 ÷120°C
Sheath diameter d
Ø 3,5 tapered conic to Ø 3 mm
Response time (*)
(*) test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step
< 3,5 seconds
Sheet material
AISI 316L
Insulation resistance
100 M Ω@ 100 Vdc.
Stem length L
13 mm
24 mm
Type of connector
male 4-pin connector with M12x1 metal screw lock (in accordance with IEC 61076-2-101 STANDARDS)
Connection body material
POLYAMYDE (MOULDED)
Maximum connector temperature
90°C
Process connection (*)
(*) Thread STANDARDS (CYL. GAS in accordance with UNI-ISO 228) (CON. GAS in accordance with UNI-ISO 7-1) (NPT in accordance with ANSI B 1.20.1)
1/8" GAS CIL. sec. UNI-ISO 228
M10 x 1
Marking
marked with calibration value at 0 °C, production date and traceability code
International protection marking (*)
(*) According to IEC 60529
IP67
Maximum working pressure
PN 100 BAR
EXTENSION CABLE
Cable conductors
copper tinned
Number of cable conductors
3
Conductor dimension
AWG 24
Conductor feature
strand (7 wire)
Primary insulation
FEP
Primary insulation colour
1 white, 2 red
Secondary insulation
GS (silicone rubber)
Secondary insulation colour
white
Cable size or external shape
about Ø 3,3 mm
Cable working temperature
-40 ÷200°C (peak MAX 230°C)
Shield (internal)
Absent
Outside diameter of single conductor (*)
(*) primary insulation
Not specified
External sheath
Absent